fix(session): return proper exit codes for cmd_continue and fork_agent

- fork_agent() now returns exit code instead of echoing status
- cmd_continue() returns exit code 2 when max agents reached
- cmd_continue() returns exit code 1 for general errors (instead of exit 1)
- ensure_worktree() returns exit code 2 for max agents condition
- Add EXITCODES.md documenting all exit codes

Closes #248

EXITCODES.md

@@ -0,0 +1,61 @@
+# Exit Codes
+
+This document describes the exit codes used by kugetsu commands.
+
+## Exit Codes
+
+| Exit Code | Meaning |
+|-----------|---------|
+| 0 | Success - operation completed successfully |
+| 1 | General error - worktree/session/validation failed |
+| 2 | Max concurrent agents reached (MAX_CONCURRENT_AGENTS limit) |
+
+## Commands
+
+### cmd_continue / cmd_start
+
+The `cmd_continue` command (aliased to `cmd_start`) returns exit codes to indicate the result of the operation:
+
+- **Exit 0**: Success - agent forked successfully
+- **Exit 1**: General error - worktree/session/validation failed
+- **Exit 2**: Max concurrent agents reached
+
+### Internal Functions
+
+#### fork_agent()
+
+Forks a new agent session for a given worktree.
+
+- **Return 0**: Success - agent forked successfully
+- **Return 1**: General error - invalid worktree path or other failure
+
+#### ensure_worktree()
+
+Ensures a worktree exists for the given issue reference.
+
+- **Return 0**: Success - worktree existed or was created
+- **Return 1**: General error - base session not found or worktree creation failed
+- **Return 2**: Max concurrent agents reached
+
+## Daemon Integration
+
+These exit codes are designed to help the queue daemon distinguish between recoverable and non-recoverable errors:
+
+- **Exit 2 (max agents)**: This is a recoverable error - the daemon can retry later when agents become available
+- **Exit 1 (general error)**: Non-recoverable - the task should be marked as failed
+
+## MAX_CONCURRENT_AGENTS
+
+The maximum number of concurrent development agents is controlled by the `MAX_CONCURRENT_AGENTS` configuration variable (default: 3).
+
+Set this in your `config` file:
+
+```bash
+MAX_CONCURRENT_AGENTS=5
+```
+
+Or via environment variable:
+
+```bash
+export MAX_CONCURRENT_AGENTS=5
+```

skills/kugetsu/SKILL.md

@@ -364,10 +364,14 @@ kugetsu queue-daemon logs       # Show recent daemon logs
 
 **Daemon Behavior:**
 1. Runs at configurable interval (default: 5 minutes)
-2. Checks if active agents < MAX_CONCURRENT_AGENTS
-3. Picks 1-N pending items (configurable batch size)
-4. Forks PM session for each picked item
-5. PM decides whether to use `start` or `continue`
+2. Checks queue for pending items
+3. For each pending item:
+   - Acquires lock to prevent duplicate processing
+   - Sources kugetsu-session.sh and calls `cmd_continue`
+   - `cmd_continue` handles worktree/session creation and forks dev agent from base session
+   - Updates queue item state to "notified"
+4. Uses per-issue locking to prevent race conditions
+5. Implements timeout for tasks that don't complete (marks as "error" after TASK_TIMEOUT_HOURS)
 
 **Queue Directory:**
 ```
@@ -526,6 +530,13 @@ The script will:
 
 See [docs/kugetsu-setup.md](../../docs/kugetsu-setup.md) for full Tailscale setup documentation.
 
+## Version History
+
+### v0.2.3
+- **Queue daemon context drift fix** (issue #156): Daemon now sources kugetsu-session.sh and calls `cmd_continue` directly instead of forking PM session. This fixes context drift where daemon would lose track of task state.
+- **Daemon locking**: Added per-issue locking to prevent race conditions when multiple daemon instances run.
+- **Timeout handling**: Tasks that don't complete within TASK_TIMEOUT_HOURS are marked as "error".
+
 ## Without kugetsu
 
 If kugetsu is not available, use opencode directly:

skills/kugetsu/scripts/kugetsu

@@ -17,77 +17,122 @@ usage() {
 kugetsu - OpenCode Session Manager (Issue-Driven)
 
 Usage:
-    kugetsu init [--force]                            Initialize base + pm-agent sessions (requires TTY)
-    kugetsu start <issue-ref> <message> [--debug]    Start task for issue (forks base session)
-    kugetsu continue <issue-ref> [message] [--debug] Continue existing task for issue
-    kugetsu delegate <message>                        Send message to PM agent (fire-and-forget)
-    kugetsu logs [n]                                  Show recent delegation logs (default: 10)
-    kugetsu status                                    Check kugetsu initialization status
-    kugetsu doctor [--fix]                            Diagnose and fix kugetsu issues
-    kugetsu notify [list|clear]                        Show or clear notifications
-    kugetsu list                                     List all tracked sessions
-    kugetsu prune [--force]                          Remove orphaned sessions (keeps base + pm-agent)
-    kugetsu destroy <issue-ref> [-y]                  Delete session for issue
-    kugetsu destroy --pm-agent [-y]                   Delete pm-agent session (not recommended)
-    kugetsu destroy --base [-y]                      Delete base session
-    kugetsu set-pr <issue-ref> <pr-url>            Set PR URL for session (for PR tracking)
-    kugetsu context <issue-ref>                        Show context for issue
-    kugetsu queue [list|stats|clear]                  Show queue status or statistics
-    kugetsu queue enqueue <issue-ref> <message>       Enqueue a task (normally via delegate)
-    kugetsu queue-daemon [start|stop|restart|status|logs]  Manage queue daemon
-    kugetsu env [get|set|list]                        Manage agent environment variables
-    kugetsu server [list|add|remove|default|get]     Manage git server configurations
-    kugetsu help                                     Show this help
+    kugetsu <command> [subcommand] [options]
+
+Commands:
+    init [--force]                                    Initialize base + pm-agent sessions (requires TTY)
+    start <issue-ref> <message> [--debug]            Start task for issue (forks base session)
+    continue <issue-ref> [message] [--debug]          Continue existing task for issue
+    delegate <message>                                Send message to PM agent (fire-and-forget)
+    logs [n]                                          Show recent delegation logs (default: 10)
+    status                                            Check kugetsu initialization status
+    doctor [--fix]                                    Diagnose and fix kugetsu issues
+    notify [list|clear]                               Show or clear notifications
+    list                                              List all tracked sessions
+    prune [--force]                                  Remove orphaned sessions
+    destroy <target> [-y]                             Delete session (issue, pm-agent, or base)
+    set-pr <issue-ref> <pr-url>                       Set PR URL for session
+    context <issue-ref>                               Show context for issue
+    queue [subcommand]                                Queue management
+    queue-daemon [subcommand]                         Queue daemon management
+    env [subcommand]                                  Environment variable management
+    server [subcommand]                                Git server configuration
+    help [command]                                   Show help for a command
+
+Use 'kugetsu <command> help' for subcommand help.
+Example: kugetsu queue help, kugetsu queue-daemon help
 
 Issue Ref Format:
     instance/user/repo#number
     Example: github.com/shoko/kugetsu#14
+EOF
+}
 
-Commands:
-    init        Create base + pm-agent sessions via TUI. Requires terminal access.
-                Use --force to reinitialize if sessions exist.
-    start       Fork new session from base for specific issue.
-                Requires pm-agent to be running (created by init).
-    continue    Continue work on existing issue session.
-    delegate    Send message to PM agent for task coordination.
-                Fire-and-forget: returns immediately, runs in background.
-                Use 'kugetsu logs' to check output.
-    logs        Show recent delegation logs.
-                Default: 10 most recent. Use 'kugetsu logs 20' for more.
-    status      Check if kugetsu is initialized and PM agent is active.
-    doctor      Diagnose kugetsu issues. Use --fix to attempt repairs.
-    notify      Show or clear notifications from PM agent.
-                Use 'kugetsu notify list' to see unread notifications.
-    list        Show all sessions (base + pm-agent + forked issues).
-    prune       Remove sessions not in index (orphaned from opencode).
-                Use --force to skip confirmation.
-    destroy     Delete specific issue, pm-agent, or base session.
+usage_queue() {
+    cat << 'EOF'
+kugetsu queue - Queue management
 
-Options:
-    --debug   Show real-time debug output and capture to debug.log
+Usage:
+    kugetsu queue [subcommand]
 
-PM Context:
-    kugetsu reads ~/.kugetsu/pm-agent.md (if exists) and injects it
-    into the PM agent session at init time. This allows customizing PM
-    behavior without recreating the session.
-
-Notifications:
-    PM Agent writes task completion notifications to ~/.kugetsu/notifications.json
-    Use 'kugetsu notify list' to see unread notifications.
+Subcommands:
+    list                                               Show pending tasks (default)
+    stats                                              Show queue statistics
+    clear                                              Clear all queue items
+    enqueue <issue-ref> <message>                      Enqueue a task
+    help                                               Show this help
 
 Examples:
-    kugetsu init
-    kugetsu status
-    kugetsu delegate "work on issue #5"
-    kugetsu logs
-    kugetsu logs 20
-    kugetsu doctor
-    kugetsu doctor --fix
-    kugetsu notify list
-    kugetsu notify clear
-    kugetsu start github.com/shoko/kugetsu#14 "fix bug"
-    kugetsu continue github.com/shoko/kugetsu#14 "add tests"
-    kugetsu list
+    kugetsu queue list
+    kugetsu queue stats
+    kugetsu queue clear
+    kugetsu queue enqueue github.com/shoko/kugetsu#14 "fix bug"
+EOF
+}
+
+usage_queue_daemon() {
+    cat << 'EOF'
+kugetsu queue-daemon - Queue daemon management
+
+Usage:
+    kugetsu queue-daemon [subcommand]
+
+Subcommands:
+    start                                              Start the queue daemon
+    stop                                               Stop the queue daemon
+    restart                                            Restart the queue daemon
+    status                                             Check daemon status
+    logs                                               Show recent daemon logs
+    help                                               Show this help
+
+Examples:
+    kugetsu queue-daemon start
+    kugetsu queue-daemon status
+    kugetsu queue-daemon logs
+EOF
+}
+
+usage_env() {
+    cat << 'EOF'
+kugetsu env - Environment variable management
+
+Usage:
+    kugetsu env [subcommand]
+
+Subcommands:
+    list                                               List all environment variables
+    get <key>                                          Get a specific variable
+    set <key> <value>                                  Set a variable
+    rm <key>                                           Remove a variable
+    help                                               Show this help
+
+Examples:
+    kugetsu env list
+    kugetsu env get GITEA_TOKEN
+    kugetsu env set CUSTOM_VAR "value"
+    kugetsu env rm CUSTOM_VAR
+EOF
+}
+
+usage_server() {
+    cat << 'EOF'
+kugetsu server - Git server configuration
+
+Usage:
+    kugetsu server [subcommand]
+
+Subcommands:
+    list                                               List all configured servers (default)
+    add <name> <url>                                   Add a new server
+    remove <name>                                      Remove a server
+    default [<name>]                                   Get or set default server
+    get [<name>]                                       Get server URL
+    help                                               Show this help
+
+Examples:
+    kugetsu server list
+    kugetsu server add github.com https://github.com
+    kugetsu server default github.com
 EOF
 }
 
@@ -865,10 +910,15 @@ find_sessions_by_issue_number() {
 }
 
 cmd_queue() {
-    local action="${1:-list}"
-    shift
+    local action="${1:-}"
     
     case "$action" in
+        ""|help|--help|-h)
+            usage_queue
+            ;;
+        help|--help|-h)
+            usage_queue
+            ;;
         list)
             local pending_tasks=$(get_pending_tasks 10)
             if [ "$pending_tasks" = "[]" ]; then
@@ -898,8 +948,8 @@ cmd_queue() {
             echo "Queue cleared."
             ;;
         enqueue)
-            local issue_ref="${1:-}"
-            local message="${2:-}"
+            local issue_ref="${2:-}"
+            local message="${3:-}"
             if [ -z "$issue_ref" ] || [ -z "$message" ]; then
                 echo "Usage: kugetsu queue enqueue <issue-ref> <message>" >&2
                 exit 1
@@ -910,16 +960,20 @@ cmd_queue() {
             check_task_timeouts
             ;;
         *)
-            echo "Usage: kugetsu queue [list|stats|clear|enqueue]" >&2
+            echo "Unknown queue subcommand: $action" >&2
+            usage_queue
             exit 1
             ;;
     esac
 }
 
 cmd_queue_daemon() {
-    local action="${1:-status}"
+    local action="${1:-}"
     
     case "$action" in
+        ""|help|--help|-h)
+            usage_queue_daemon
+            ;;
         start)
             if [ -f "$QUEUE_DAEMON_PID_FILE" ]; then
                 local old_pid=$(cat "$QUEUE_DAEMON_PID_FILE")
@@ -978,7 +1032,8 @@ cmd_queue_daemon() {
             fi
             ;;
         *)
-            echo "Usage: kugetsu queue-daemon [start|stop|restart|status|logs]" >&2
+            echo "Unknown queue-daemon subcommand: $action" >&2
+            usage_queue_daemon
             exit 1
             ;;
     esac
@@ -1059,10 +1114,12 @@ set_debug_mode() {
 }
 
 cmd_env() {
-    local action="${1:-list}"
-    shift
+    local action="${1:-}"
     
     case "$action" in
+        ""|help|--help|-h)
+            usage_env
+            ;;
         list)
             echo "Agent environment variables:"
             if [ -d "$ENV_DIR" ]; then
@@ -1080,7 +1137,7 @@ cmd_env() {
             fi
             ;;
         get)
-            local key="${1:-}"
+            local key="${2:-}"
             if [ -z "$key" ]; then
                 echo "Usage: kugetsu env get <key>" >&2
                 exit 1
@@ -1095,8 +1152,8 @@ cmd_env() {
             fi
             ;;
         set)
-            local key="${1:-}"
-            local value="${2:-}"
+            local key="${2:-}"
+            local value="${3:-}"
             if [ -z "$key" ] || [ -z "$value" ]; then
                 echo "Usage: kugetsu env set <key> <value>" >&2
                 exit 1
@@ -1105,8 +1162,8 @@ cmd_env() {
             echo "${key}=${value}" >> "$ENV_DIR/default.env"
             echo "Set $key in $ENV_DIR/default.env"
             ;;
-        rm)
-            local key="${1:-}"
+        rm|remove)
+            local key="${2:-}"
             if [ -z "$key" ]; then
                 echo "Usage: kugetsu env rm <key>" >&2
                 exit 1
@@ -1117,7 +1174,8 @@ cmd_env() {
             fi
             ;;
         *)
-            echo "Usage: kugetsu env [list|get|set|rm]" >&2
+            echo "Unknown env subcommand: $action" >&2
+            usage_env
             exit 1
             ;;
     esac
@@ -1127,7 +1185,10 @@ cmd_server() {
     local action="${1:-}"
     
     case "$action" in
-        ""|"list")
+        ""|help|--help|-h)
+            usage_server
+            ;;
+        "list")
             if [ -z "${GIT_SERVERS+x}" ]; then
                 echo "No git servers configured"
                 return
@@ -1204,14 +1265,8 @@ cmd_server() {
             fi
             ;;
         *)
-            echo "Usage: kugetsu server <list|add|remove|default|get>" >&2
-            echo "" >&2
-            echo "Commands:" >&2
-            echo "  list              List all configured git servers" >&2
-            echo "  add <name> <url>  Add a new git server" >&2
-            echo "  remove <name>     Remove a git server" >&2
-            echo "  default [<name>]  Get or set default server" >&2
-            echo "  get [<name>]      Get URL for a server (default: current default)" >&2
+            echo "Unknown server subcommand: $action" >&2
+            usage_server
             exit 1
             ;;
     esac
@@ -1321,8 +1376,30 @@ main() {
     
     case "$command" in
         help|--help|-h)
+            local subcommand="${1:-}"
+            case "$subcommand" in
+                queue|"")
+                    usage_queue
+                    ;;
+                queue-daemon)
+                    usage_queue_daemon
+                    ;;
+                env)
+                    usage_env
+                    ;;
+                server)
+                    usage_server
+                    ;;
+                "")
                     usage
                     ;;
+                *)
+                    echo "Help not available for '$subcommand'" >&2
+                    usage
+                    exit 1
+                    ;;
+            esac
+            ;;
         init)
             cmd_init "$@"
             ;;

skills/kugetsu/scripts/kugetsu-config.sh

@@ -26,6 +26,10 @@ QUEUE_DAEMON_INTERVAL_MINUTES="${QUEUE_DAEMON_INTERVAL_MINUTES:-5}"
 QUEUE_CLEANUP_AGE_DAYS="${QUEUE_CLEANUP_AGE_DAYS:-7}"
 TASK_TIMEOUT_HOURS="${TASK_TIMEOUT_HOURS:-1}"
 
+NETWORK_RETRY_ATTEMPTS="${NETWORK_RETRY_ATTEMPTS:-3}"
+NETWORK_RETRY_DELAY_SECONDS="${NETWORK_RETRY_DELAY_SECONDS:-5}"
+KUGETSU_BASE_BRANCH="${KUGETSU_BASE_BRANCH:-origin/main}"
+
 # Load user config overrides (~/.kugetsu/config)
 if [ -f "$KUGETSU_DIR/config" ]; then
     source "$KUGETSU_DIR/config"
@@ -87,3 +91,24 @@ set_debug_mode() {
     
     echo "${filtered_args[@]}"
 }
+
+retry_with_backoff() {
+    local max_attempts="${1:-$NETWORK_RETRY_ATTEMPTS}"
+    local delay_seconds="${2:-$NETWORK_RETRY_DELAY_SECONDS}"
+    local command="$3"
+    local remaining_attempts=$max_attempts
+    
+    while [ $remaining_attempts -gt 0 ]; do
+        if eval "$command"; then
+            return 0
+        fi
+        remaining_attempts=$((remaining_attempts - 1))
+        if [ $remaining_attempts -gt 0 ]; then
+            log "warn" "retry_with_backoff" "Command failed, $remaining_attempts retries remaining. Waiting ${delay_seconds}s..."
+            sleep "$delay_seconds"
+            delay_seconds=$((delay_seconds * 2))
+        fi
+    done
+    log "error" "retry_with_backoff" "Command failed after $max_attempts attempts"
+    return 1
+}

skills/kugetsu/scripts/kugetsu-queue-daemon.sh

@@ -75,7 +75,7 @@ check_task_completion() {
             local has_commits=false
 
             if [ -d "$worktree_path" ] && [ -d "$worktree_path/.git" ]; then
-                if [ -n "$(git -C "$worktree_path" log --oneline origin/main..HEAD 2>/dev/null)" ]; then
+                if [ -n "$(git -C "$worktree_path" log --oneline "$KUGETSU_BASE_BRANCH..HEAD" 2>/dev/null)" ]; then
                     has_commits=true
                 fi
             fi
@@ -95,7 +95,7 @@ check_task_completion() {
             local has_commits=false
 
             if [ -d "$worktree_path" ] && [ -d "$worktree_path/.git" ]; then
-                if [ -n "$(git -C "$worktree_path" log --oneline origin/main..HEAD 2>/dev/null)" ]; then
+                if [ -n "$(git -C "$worktree_path" log --oneline "$KUGETSU_BASE_BRANCH..HEAD" 2>/dev/null)" ]; then
                     has_commits=true
                 fi
             fi

skills/kugetsu/scripts/kugetsu-session.sh

@@ -13,7 +13,8 @@ count_active_dev_sessions() {
     if [ -d "$SESSIONS_DIR" ]; then
         for session_file in "$SESSIONS_DIR"/*.json; do
             if [ -f "$session_file" ]; then
-                local filename=$(basename "$session_file")
+                local filename
+                filename=$(basename "$session_file")
                 if [ "$filename" != "base.json" ] && [ "$filename" != "pm-agent.json" ]; then
                     count=$((count + 1))
                 fi
@@ -239,18 +240,39 @@ create_session() {
         return 1
     fi
     
-    local before_file="$KUGETSU_DIR/sessions/before$$.json"
-    local after_file="$KUGETSU_DIR/sessions/after$$.json"
+    local before_file
+    before_file="$KUGETSU_DIR/sessions/before$$.json"
+    local after_file
+    after_file="$KUGETSU_DIR/sessions/after$$.json"
     
     opencode session list --format=json > "$before_file" 2>/dev/null || printf '{}' > "$before_file"
     
-    opencode run --fork --session "$base_session" "new session" >/dev/null 2>&1
+    local fork_success=false
+    local attempt=0
+    local max_attempts="${NETWORK_RETRY_ATTEMPTS:-3}"
+    
+    while [ $attempt -lt $max_attempts ] && [ "$fork_success" = false ]; do
+        attempt=$((attempt + 1))
+        if opencode run --fork --session "$base_session" "new session" >/dev/null 2>&1; then
+            fork_success=true
+        elif [ $attempt -lt $max_attempts ]; then
+            log "warn" "create_session" "Fork attempt $attempt failed, retrying..."
+            sleep "$((attempt * 2))"
+        fi
+    done
+    
+    if [ "$fork_success" = false ]; then
+        log "error" "create_session" "Failed to fork session after $max_attempts attempts"
+        rm -f "$before_file" "$after_file"
+        return 1
+    fi
     
     sleep 1
     
     opencode session list --format=json > "$after_file" 2>/dev/null || printf '{}' > "$after_file"
     
-    local new_session_id=$(python3 << PYEOF
+    local new_session_id
+    new_session_id=$(python3 << PYEOF
 import json
 
 with open("$before_file", 'r') as f:
@@ -358,8 +380,8 @@ ensure_worktree() {
     local active_count=$(count_active_dev_sessions)
     if [ "$active_count" -ge "${MAX_CONCURRENT_AGENTS:-3}" ]; then
         log "error" "ensure_worktree" "Max concurrent agents reached for $issue_ref"
-        echo "error"
-        return 1
+        echo "max_agents"
+        return 2
     fi
     
     if create_worktree "$issue_ref" "$WORKTREES_DIR" 2>&1 | tee >(cat >&2); then
@@ -389,20 +411,20 @@ ensure_session() {
         session_exists=true
     fi
     
-    if $worktree_exists && $session_exists; then
+    if [ "$worktree_exists" = true ] && [ "$session_exists" = true ]; then
         log "info" "ensure_session" "Session already exists for $issue_ref"
         echo "continued"
         return 0
     fi
     
-    if ! $worktree_exists && $session_exists; then
+    if [ "$worktree_exists" = false ] && [ "$session_exists" = true ]; then
         log "warn" "ensure_session" "Session exists but worktree is missing. Removing stale session..."
         rm -f "$session_path"
         remove_issue_from_index "$issue_ref"
         session_exists=false
     fi
     
-    if ! $worktree_exists; then
+    if [ "$worktree_exists" = false ]; then
         local wt_status=$(ensure_worktree "$issue_ref")
         if [ "$wt_status" != "created" ] && [ "$wt_status" != "existed" ]; then
             log "error" "ensure_session" "Failed to ensure worktree for $issue_ref"
@@ -445,7 +467,6 @@ fork_agent() {
     
     if [ -z "$worktree_path" ] || [ ! -d "$worktree_path" ]; then
         log "error" "fork_agent" "Invalid worktree path: $worktree_path"
-        echo "error"
         return 1
     fi
     
@@ -454,7 +475,7 @@ fork_agent() {
     cd "$worktree_path"
     local sanitized_id=$(echo "$session_id" | sed 's/[^a-zA-Z0-9_-]/_/g')
     mkdir -p "$worktree_path/.kugetsu"
-    if [ ! -f "$worktree_path/.gitignore" ] || ! grep -q "^.kugetsu/" "$worktree_path/.gitignore"; then
+    if [ ! -f "$worktree_path/.gitignore" ] || ! grep -q "^.kugetsu/" "$worktree_path/.gitignore" ]; then
         echo ".kugetsu/" >> "$worktree_path/.gitignore" 2>/dev/null || true
     fi
     local msg_file="$worktree_path/.kugetsu/msg.txt"
@@ -462,7 +483,6 @@ fork_agent() {
     nohup sh -c "GITEA_TOKEN='${GITEA_TOKEN:-}' opencode run '@$msg_file' --session '$session_id'" >> "$LOGS_DIR/dev-$sanitized_id.log" 2>&1 &
     
     log "info" "fork_agent" "Forked agent for session $session_id in $worktree_path"
-    echo "forked"
     return 0
 }
 
@@ -477,10 +497,10 @@ cmd_continue() {
     if [ -z "$issue_ref" ]; then
         echo "Error: issue ref is required" >&2
         echo "Usage: kugetsu continue <issue-ref> [message]" >&2
-        exit 1
+        return 1
     fi
     
-    validate_issue_ref "$issue_ref"
+    validate_issue_ref "$issue_ref" || return 1
     
     if [ -z "$message" ]; then
         message=$(build_dev_agent_message "$issue_ref" "")
@@ -489,15 +509,19 @@ cmd_continue() {
     fi
     
     local worktree_status=$(ensure_worktree "$issue_ref")
+    if [ "$worktree_status" = "max_agents" ]; then
+        echo "Error: Max concurrent agents reached for '$issue_ref'" >&2
+        return 2
+    fi
     if [ "$worktree_status" = "error" ]; then
         echo "Error: Failed to ensure worktree for '$issue_ref'" >&2
-        exit 1
+        return 1
     fi
     
     local session_status=$(ensure_session "$issue_ref")
     if [ "$session_status" = "error" ]; then
         echo "Error: Failed to ensure session for '$issue_ref'" >&2
-        exit 1
+        return 1
     fi
     
     kugetsu_context_dump "$issue_ref" "$message" "$(issue_ref_to_branch_name "$issue_ref")"
@@ -507,17 +531,13 @@ cmd_continue() {
     local opencode_session_id=$(python3 -c "import json; print(json.load(open('$session_path')).get('opencode_session_id', ''))" 2>/dev/null || echo "")
     local worktree_path=$(python3 -c "import json; print(json.load(open('$session_path')).get('worktree_path', ''))" 2>/dev/null || echo "")
     
-    local fork_status=$(fork_agent "$opencode_session_id" "$worktree_path" "$message")
-    if [ "$fork_status" = "error" ]; then
-        echo "Error: Failed to fork agent for '$issue_ref'" >&2
-        exit 1
-    fi
+    fork_agent "$opencode_session_id" "$worktree_path" "$message" || return 1
     
-    log "info" "cmd_continue" "Result for $issue_ref: worktree=$worktree_status session=$session_status fork=$fork_status"
+    log "info" "cmd_continue" "Result for $issue_ref: worktree=$worktree_status session=$session_status fork=forked"
     
     echo "Session continued for '$issue_ref': $opencode_session_id"
     echo "Worktree: $worktree_path"
-    echo "${worktree_status}-${session_status}-${fork_status}"
+    echo "${worktree_status}-${session_status}-forked"
 }
 
 cmd_list() {

skills/kugetsu/scripts/kugetsu-worktree.sh

@@ -76,7 +76,8 @@ create_worktree() {
         exit 1
     fi
     
-    local worktree_parent_dir=$(dirname "$worktree_path")
+    local worktree_parent_dir
+    worktree_parent_dir=$(dirname "$worktree_path")
     mkdir -p "$worktree_parent_dir"
     
     if worktree_exists "$issue_ref" "$parent_dir"; then
@@ -85,15 +86,36 @@ create_worktree() {
     fi
     
     echo "Creating worktree at '$worktree_path'..."
-    git clone "$repo_url" "$worktree_path" 2>/dev/null || {
-        echo "Error: Failed to clone repository" >&2
+    
+    local clone_success=false
+    local attempt=0
+    local max_attempts="${NETWORK_RETRY_ATTEMPTS:-3}"
+    
+    while [ $attempt -lt $max_attempts ] && [ "$clone_success" = false ]; do
+        attempt=$((attempt + 1))
+        if [ $attempt -gt 1 ]; then
+            echo "Clone attempt $attempt of $max_attempts..."
+            sleep "$((attempt * 2))"
+        fi
+        
+        if git clone "$repo_url" "$worktree_path" 2>/dev/null; then
+            clone_success=true
+        fi
+    done
+    
+    if [ "$clone_success" = false ]; then
+        echo "Error: Failed to clone repository after $max_attempts attempts" >&2
         exit 1
-    }
+    fi
     
     echo "Creating branch '$branch_name'..."
-    (cd "$worktree_path" && git checkout -b "$branch_name" origin/main 2>/dev/null || git checkout -b "$branch_name" main 2>/dev/null) || {
+    if git -C "$worktree_path" checkout -b "$branch_name" "$KUGETSU_BASE_BRANCH" 2>/dev/null; then
+        :
+    elif git -C "$worktree_path" checkout -b "$branch_name" main 2>/dev/null; then
+        :
+    else
         echo "Warning: Could not checkout branch (may need to run from within worktree after session)" >&2
-    }
+    fi
     
     echo "Worktree created at: $worktree_path"
 }